The ISIS II Recoil Reducer is the only unit of its kind and is manufactured in the UK. The unit was developed and patented in 2001 and has sold very successfully throughout the world since.
Each unit comes with easy to follow fitting instructions and a Lifetime Guarantee.
The main components of the ISIS II are the top and bottom plates which are made from high impact polymer to give a lightweight and very strong body which houses the latest, lubricant free, linear bearings and hard anodised aluminium guide shafts.
The bulk of the energy absorption is due to the highly efficient miniature shock absorber which is specially designed to maximise the reduction of the peak forces created as a gun is fired.
Three systems are used to control the recoil effect: - a) the hydraulic shock absorber that does the bulk of the work. b) The mechanical resistance of specially manufactured springs which can be varied in strength, dependent on each individual shooter and c) The pneumatic smoothing effect created by metered air release as the unit compresses. These three mechanisms working together create a linear deceleration of the gun over a very short distance (about ¼) which is hardly noticeable to the majority of shooters. The effect is that of a much lighter cartridge being used and significantly less physical punishment transferred to the body. Whilst this is obviously desirable to reduce the possibility of physical damage it greatly reduces fatigue over long periods of sustained shooting during competitions.
A thin heel plate or firm rubber pad is all that needs to be fitted to the unit. The narrowness of the pad means that a minimum of stock length removal is needed when fitting the unit and the balance or the gun can be maintained which is very important to sporting and F.I.T.A.S.C. shooters.
The black leather trim gives the effect of a standard Recoil Pad fitted to the gun.
The Standard Sporting Model is 1 thick and the specially designed Trap unit (for pre mounted disciplines) is 1 ¼ thick. The Standard unit will fit onto Semi Autos such as the Beretta range and there is a special Short Auto unit for those with shortened auto stocks or long stock retention screws.
Tel/Fax: +44 (0) 1763 837 140 (from the USA dial 01144 1763 837 140) - email: firstname.lastname@example.org